If you own a Chevy Impala, you may have encountered a warning message on your dashboard called the Service Tire Monitor System.
This indicator signifies a problem with the tire pressure monitoring system and should be addressed promptly.
In this post, I will explain the Chevy Impala’s Service Tire Monitor System, its functioning, and the necessary steps to take when the warning light appears on your dashboard.
So, if you’re curious to learn more, read on!
What Does a Chevrolet Impala Service Tire Monitor System Message Mean?
When you notice a Service Tire Monitor System message on the dashboard of your Chevy Impala, it means there is a problem with the Tire Pressure Monitoring System (TPMS).
The TPMS is designed to notify you when the tire pressure in one or more of your tires drops below the recommended level.
This drop in pressure can result in reduced fuel efficiency, compromised handling, or decreased payload capacity.
There are a few common causes that can trigger the Service TPMS warning message on your Impala’s dashboard:
- A tire sensor with a flat battery
- A damaged tire sensor
- A tire sensor that needs recalibration
- An issue with the central control module responsible for receiving sensor readings
To identify the cause of the warning, you can use a TPMS diagnostic tool or visit a professional mechanic.
Depending on the situation, the tire sensor may need replacement or simply reprogramming.
Once the problem is resolved, it’s important to regularly check and maintain your tire pressure at the recommended level.
This will ensure that your Chevy Impala continues to perform optimally and helps you avoid future Service Tire Monitor System warnings.
4 Most Common Causes For Service Tire Monitor System Warning Message
Flat Battery in A Tire Sensor
If you own a Chevy Impala and come across the service tire monitor system warning message, it’s likely due to a tire sensor with a flat battery.
These sensors are equipped with a lithium-ion battery that powers them and transmits radio signals to the central control module.
Over time, the battery’s power diminishes, leading to TPMS sensor malfunctions.
To resolve this issue, you should replace the battery if it’s flat or consider replacing the entire sensor if it’s too old.
By taking these steps, you can ensure the proper functioning of your Impala’s tire monitor system.
Damaged Tire Sensor
If you own a Chevy Impala, it’s important to know that a damaged tire sensor in your vehicle can activate the service tire monitor system warning message.
This damage can occur due to several reasons, including road debris, potholes, or incorrect installation.
Take a visual inspection of all the tire sensors to spot any signs of damage.
In case you come across a damaged sensor, it’s crucial to replace it promptly to prevent any further complications with the TPMS system.
Tire Sensor that Needs to Be Recalibrated
Sometimes, the tire sensor in your Chevy Impala may not require replacement but instead need recalibration.
Situations that can trigger this include tire changes, rotations, or when the sensor loses connection with the main system.
To recalibrate the TPMS sensor, refer to the instructions outlined in your owner’s manual or seek guidance from a professional mechanic.
By following proper recalibration procedures, you ensure that the sensors function correctly and deliver precise readings to the central control module.
Problem with The Central Control Module that Receives the Readings from The Sensors
Lastly, a potential issue might originate from the central control module in your Chevy Impala.
This module is responsible for receiving radio signals from the TPMS sensors and processing that data.
If it encounters any problems or malfunctions, it could trigger a warning message for the service tire monitor system.
To tackle this matter, it is advisable to consult a professional mechanic who can diagnose both the engine and TPM system of your Chevy Impala.
They possess the expertise to identify any problems within the central control module and offer appropriate solutions to resolve the issue.
FAQs
How to Clear a Service TPMS Message on a Chevy Impala?
To clear the Service TPMS message on your Chevy Impala, first make sure that all tires are properly inflated – not overinflated or underinflated.
You can check tire pressure using a tire gauge. Remember that weather can affect tire pressure, so it’s essential to check it regularly.
After confirming the correct tire pressure, turn off the ignition and remove the key. Insert the key back into the ignition and turn it to the “ON” position but don’t start the engine.
Check your vehicle manual for specific TPMS reset instructions, as they may vary depending on the model and year.
If the message persists after following these steps or if your Impala displays the “Service Tire Monitor System” warning, it may be time to visit the dealership for further assistance and possible sensor replacement.
Can I Still Drive My Chevy Impala with the ‘Service Tire Monitor System’ Warning Message Displayed?
While it is possible to continue driving your Chevy Impala with the “Service Tire Monitor System” warning message displayed, it’s not recommended.
The warning indicates a problem with the tire monitoring system itself, not necessarily the tire pressure.
Tire pressure monitoring is crucial for maintaining fuel efficiency, proper traction, and preventing tire blowouts.
Driving without a properly functioning TPMS may put you at risk of encountering issues related to tire pressure.
It’s best to have the system checked and, if necessary, repaired before continuing to drive.
How Much Does It Cost to Replace a Tire Pressure Sensor on a Chevy Impala?
The cost of replacing a tire pressure sensor on your Chevy Impala may vary depending on factors such as your location, dealership labor rates, and if any additional parts are needed.
On average, the price for a single tire pressure sensor ranges from $50 to $100. Labor costs can vary but expect to pay between $30 and $50 per sensor for installation.
Keep in mind that if all four tire sensors require replacement, the total cost will be significantly higher.
It’s essential to maintain proper tire pressure and monitor your TPMS to ensure the sensors last as long as possible.
When you get new tires installed, always have the tire pressure sensors checked as part of routine maintenance.
What Years Of the Chevy Impala Are Most Affected?
Chevy model: | Impala |
Most Affected Years: | 2006 |
2007 | |
2008 | |
2009 | |
2011 | |
2015 | |
2016 |
Wrap Up
In summary, the Chevy Impala Service Tire Monitor System is a vital feature that assists drivers in maintaining proper tire pressure and avoiding potential safety risks.
Nevertheless, encountering an error message indicating a system problem is not unusual.
The main causes for this error message include a tire sensor with a depleted battery, a damaged tire sensor, a need for sensor recalibration, or a malfunction in the central control module responsible for receiving sensor readings.
Promptly addressing any issues with the service tire monitor system is crucial for ensuring both the safety and durability of the Impala.