Chevy Suburban Service Tire Monitor System (Causes & Fixes)

If you own a Chevy Suburban, you might have encountered the Service Tire Monitor System warning message displayed on your dashboard.

This alert signifies a problem with the tire pressure monitoring system that requires immediate attention.

In this post, I will provide insights into the Chevy Suburban’s Service Tire Monitor System, its functionality, and the appropriate actions to take when you notice this warning light on your dashboard.

So, if you’re interested in discovering more about it, continue reading!

“Chevy Suburban” by JLaw45 is licensed under CC BY 2.0. To view a copy of this license, visit

What Does a Chevrolet Suburban Service Tire Monitor System Message Mean?

When encountering a Service Tire Monitor System message on the dashboard of your Chevy Suburban, it indicates an issue with the Tire Pressure Monitoring System (TPMS).

The TPMS serves the purpose of alerting you when the tire pressure in one or more tires drops below the recommended level.

This drop in pressure can lead to undesirable consequences such as reduced fuel efficiency, compromised handling, or decreased payload capacity.

There can be several reasons triggering the Service TPMS warning message on your Suburban’s dashboard.

The most common causes include a flat battery in a tire sensor, a damaged tire sensor, a sensor requiring recalibration, or a problem with the central control module responsible for receiving sensor readings.

To identify the underlying cause of the warning message, you should either use a TPMS diagnostic tool or consult a professional mechanic.

Depending on the situation, the tire sensor may need replacement or simply reprogramming.

Once the issue has been resolved, it is crucial to regularly check and maintain the tire pressure at the recommended level.

This proactive measure ensures optimal performance of your Chevy Suburban and helps prevent future Service Tire Monitor System warnings.

4 Most Common Causes For Service Tire Monitor System Warning Message

Flat Battery in A Tire Sensor

If you own a Chevy Suburban, you might encounter a service tire monitor system warning message.

This warning is often triggered by a flat battery in one of the tire sensors.

In most cases, these sensors are equipped with lithium-ion batteries that provide power and transmit radio signals to the central control module.

As time passes, the battery’s power diminishes, leading to malfunctioning TPMS sensors.

To resolve this issue, it is advisable to replace the depleted battery.

However, if the entire sensor is too old, it would be best to replace the sensor itself.

Damaged Tire Sensor

If you own a Chevy Suburban, it’s essential to know that a faulty tire sensor in your Suburban can activate the service tire monitor system warning.

Damage can occur due to different factors like road debris, potholes, or an incorrect installation.

To tackle this issue, visually examine all tire sensors for any visible signs of damage.

If you come across a damaged sensor, make it a priority to replace it promptly.

This precautionary step will prevent any further complications with the TPMS system, ensuring your Suburban’s tires are in optimal condition.

Tire Sensor that Needs to Be Recalibrated

Sometimes, the tire sensor in your Chevy Suburban may not need replacing but instead require recalibration.

This situation can arise when you switch out your Suburban’s tires, rotate them, or if the sensor loses connection with the main system.

To recalibrate the TPMS sensor, refer to the instructions outlined in your owner’s manual or seek assistance from a professional mechanic.

It’s crucial to ensure proper recalibration to guarantee that the sensors function accurately and transmit precise readings to the central control module.

Problem with The Central Control Module that Receives the Readings from The Sensors

Finally, there may be a potential issue with the central control module in your Chevy Suburban.

This crucial component receives radio signals from the TPMS sensors and processes the information.

If the module encounters any problems or malfunctions, it can trigger the service tire monitor system warning message.

To tackle this concern effectively, I recommend consulting a professional mechanic who can diagnose both the engine and TPM system of your Chevy Suburban.

They possess the expertise to identify any underlying issues within the central control module and provide an appropriate solution to resolve the problem.


How to Clear a Service TPMS Message on a Chevy Suburban?

To clear the Service TPMS message on your Chevy Suburban, first make sure that all tires are properly inflated – not overinflated or underinflated.

You can check tire pressure using a tire gauge. Remember that weather can affect tire pressure, so it’s essential to check it regularly.

After confirming the correct tire pressure, turn off the ignition and remove the key. Insert the key back into the ignition and turn it to the “ON” position but don’t start the engine.

Check your vehicle manual for specific TPMS reset instructions, as they may vary depending on the model and year.

If the message persists after following these steps or if your Suburban displays the “Service Tire Monitor System” warning, it may be time to visit the dealership for further assistance and possible sensor replacement.

Can I Still Drive My Chevy Suburban with the ‘Service Tire Monitor System’ Warning Message Displayed?

While it is possible to continue driving your Chevy Suburban with the “Service Tire Monitor System” warning message displayed, it’s not recommended.

The warning indicates a problem with the tire monitoring system itself, not necessarily the tire pressure.

Tire pressure monitoring is crucial for maintaining fuel efficiency, proper traction, and preventing tire blowouts.

Driving without a properly functioning TPMS may put you at risk of encountering issues related to tire pressure.

It’s best to have the system checked and, if necessary, repaired before continuing to drive.

How Much Does It Cost to Replace a Tire Pressure Sensor on a Chevy Suburban?

The cost of replacing a tire pressure sensor on your Chevy Suburban may vary depending on factors such as your location, dealership labor rates, and if any additional parts are needed.

On average, the price for a single tire pressure sensor ranges from $50 to $100. Labor costs can vary but expect to pay between $30 and $50 per sensor for installation.

Keep in mind that if all four tire sensors require replacement, the total cost will be significantly higher.

It’s essential to maintain proper tire pressure and monitor your TPMS to ensure the sensors last as long as possible.

When you get new tires installed, always have the tire pressure sensors checked as part of routine maintenance.

What Years Of the Chevy Suburban Are Most Affected?

Chevy Model Most Affected Years
Suburban 2007

Wrap Up

In summary, the Chevy Suburban’s Service Tire Monitor System is a crucial feature that assists drivers in maintaining optimal tire pressure and preventing potential safety risks.

However, encountering an error message indicating a system problem is not uncommon.

The main culprits for this message are typically a tire sensor with a depleted battery, a damaged sensor, a sensor requiring recalibration, or a malfunction in the central control module responsible for receiving sensor data.

Drivers must promptly address any service tire monitor system issues to ensure their vehicle’s safety and longevity.

Safeguarding tire pressure and mitigating potential hazards remain paramount in the Chevy Suburban’s tire monitoring capabilities.