If you own a Chevy Trax, you may have encountered the Service Tire Monitor System warning on your dashboard.
This message is an indication that there is an issue with your tire pressure monitoring system, which requires prompt attention.
In this post, I will explain the purpose of the Chevy Trax’s Service Tire Monitor System, how it operates, and provide guidance on what steps to take if you observe this warning light on your dashboard.
So, if you’re interested in learning more, continue reading!
What Does a Chevrolet Trax Service Tire Monitor System Message Mean?
When you notice a Service Tire Monitor System notification on your Chevy Trax dashboard, it means there’s a problem with the Tire Pressure Monitoring System (TPMS).
The TPMS is designed to alert you when the tire pressure in any of your tires drops below the recommended level.
This drop in pressure can result in reduced fuel efficiency, compromised handling, or decreased payload capacity.
There are various factors that can trigger the Service TPMS warning on your Trax’s dashboard. The most common causes include:
- A tire sensor with a depleted battery
- A damaged tire sensor
- A tire sensor that requires recalibration
- An issue with the central control module responsible for receiving sensor readings
To identify the exact cause of the warning message, utilize a TPMS diagnostic tool or consult a professional mechanic.
In some instances, the tire sensor may need replacement, while in others, reprogramming may suffice.
Once the problem is resolved, it’s crucial to regularly check your tire pressure and maintain it at the recommended level.
This will ensure optimal performance for your Chevy Trax and help prevent future Service Tire Monitor System warnings.
4 Most Common Causes For Service Tire Monitor System Warning Message
Flat Battery in A Tire Sensor
If you own a Chevy Trax, you may encounter a service tire monitor system warning message.
One common reason for this is a flat battery in a tire sensor.
In the Trax, these sensors are equipped with a lithium-ion battery that powers them and transmits radio signals to the central control module.
After some time, the battery may lose its power, resulting in a malfunctioning TPMS sensor.
To resolve this, you should replace the depleted battery.
However, if the sensor itself is old and worn out, it’s advisable to replace the entire sensor.
Damaged Tire Sensor
If you own a Chevy Trax, it’s important to know that a faulty tire sensor can activate the service tire monitor system warning message.
There are several potential causes for the damage, including road debris, potholes, or incorrect installation.
Take a visual inspection of all tire sensors to detect any signs of damage.
Should you come across a damaged sensor, make sure to promptly replace it to prevent any potential complications with the TPMS system.
Keeping your Trax’s tire sensors in good condition is crucial for a smooth and safe driving experience.
Tire Sensor that Needs to Be Recalibrated
Sometimes, the tire sensor in the Trax doesn’t require replacement but needs recalibration instead.
This situation may arise when you switch the Trax’s tires, rotate them, or if the sensor loses connection with the main system.
To recalibrate the TPMS sensor, refer to your owner’s manual for specific instructions or seek assistance from a professional mechanic.
It’s important to ensure proper recalibration to guarantee accurate readings from the sensors, which are then sent to the central control module.
Problem with The Central Control Module that Receives the Readings from The Sensors
Lastly, a potential issue may arise with the central control module in your Chevy Trax.
This module is responsible for receiving radio signals from the TPMS sensors and processing the data.
Any problems or malfunctions in the module could trigger a warning message for the service tire monitor system.
To resolve this, it is advisable to consult a professional mechanic who can diagnose the engine and TPM system of your Chevy Trax.
They will be able to identify any problems within the central control module and provide an appropriate solution to address the issue.
How to Clear a Service TPMS Message on a Chevy Trax?
To clear the Service TPMS message on your Chevy Trax, first make sure that all tires are properly inflated – not overinflated or underinflated.
You can check tire pressure using a tire gauge. Remember that weather can affect tire pressure, so it’s essential to check it regularly.
After confirming the correct tire pressure, turn off the ignition and remove the key. Insert the key back into the ignition and turn it to the “ON” position but don’t start the engine.
Check your vehicle manual for specific TPMS reset instructions, as they may vary depending on the model and year.
If the message persists after following these steps or if your Trax displays the “Service Tire Monitor System” warning, it may be time to visit the dealership for further assistance and possible sensor replacement.
Can I Still Drive My Chevy Trax with the ‘Service Tire Monitor System’ Warning Message Displayed?
While it is possible to continue driving your Chevy Trax with the “Service Tire Monitor System” warning message displayed, it’s not recommended.
The warning indicates a problem with the tire monitoring system itself, not necessarily the tire pressure.
Tire pressure monitoring is crucial for maintaining fuel efficiency, proper traction, and preventing tire blowouts.
Driving without a properly functioning TPMS may put you at risk of encountering issues related to tire pressure.
It’s best to have the system checked and, if necessary, repaired before continuing to drive.
How Much Does It Cost to Replace a Tire Pressure Sensor on a Chevy Trax?
The cost of replacing a tire pressure sensor on your Chevy Trax may vary depending on factors such as your location, dealership labor rates, and if any additional parts are needed.
On average, the price for a single tire pressure sensor ranges from $50 to $100. Labor costs can vary but expect to pay between $30 and $50 per sensor for installation.
Keep in mind that if all four tire sensors require replacement, the total cost will be significantly higher.
It’s essential to maintain proper tire pressure and monitor your TPMS to ensure the sensors last as long as possible.
When you get new tires installed, always have the tire pressure sensors checked as part of routine maintenance.
What Years Of the Chevy Trax Are Most Affected?
|Most Affected Years
In summary, the Chevy Trax Service Tire Monitor System is a crucial feature that assists drivers in maintaining optimal tire pressure and preventing potential safety risks.
However, encountering an error message related to the system is not uncommon.
The most frequent causes of this error message include a tire sensor with a depleted battery, a damaged tire sensor, the need for recalibration of a sensor, or a malfunction in the central control module responsible for receiving sensor readings.
To ensure the safety and durability of the vehicle, drivers should promptly address any issues with the service tire monitor system in their Chevy Trax.