P0790 Code: Meaning, Symptoms, Causes & Fixes

Many vehicles have a button that changes how the transmission shifts, such as normal, sport, power or tow mode. A P0790 code means the computer found a problem with that normal/performance switch circuit.

This guide explains what the switch does, why it fails and how to test it.

P0790 Code Breakdown

Every OBD-II code follows the same five-character pattern set by the SAE J2012 standard. Each character narrows down which system has the fault. This table shows what each part of the code tells you.

CharacterMeaningWhat It Tells You
PPowertrainThe fault is in the engine or transmission systems.
0Generic (SAE) codeThe definition is the same on every OBD-II vehicle.
7TransmissionThe fault involves the transmission, such as its sensors, solenoids, gear ratios or the torque converter clutch.
90Specific faultNormal/Performance Switch Circuit Malfunction

What the P0790 Code Means

The SAE J2012 standard defines the P0790 code as Normal/Performance Switch Circuit Malfunction. The powertrain control module (PCM) or a separate transmission control module (TCM) runs the automatic transmission. It reads speed sensors, the range sensor, fluid temperature and engine load, then controls shift solenoids, pressure control solenoids and the torque converter clutch.

When it finds a problem, it often turns on the check engine light, stores a detailed transmission code and may switch to limp mode, which holds one gear to protect the transmission.

The normal/performance switch lets the driver choose a shift pattern. In performance or sport mode, the transmission holds gears longer and shifts more firmly. The code sets when the computer sees a switch signal that is stuck, out of range or does not make sense.

Symptoms of a Mode Switch Fault

Transmission problems are usually easy to feel. Common signs of a P0790 code include:

  • Check engine light on
  • Sport, power or tow mode not working
  • Mode light stuck on or off
  • Shift pattern not changing
  • Transmission stuck in one mode

The transmission usually still shifts normally in its default mode. The main effect is that you cannot change modes.

What Causes the P0790 Code?

These are the usual causes:

  1. Failed mode switch. The contacts wear or stick.
  2. Spilled drink in the console. Liquid gets into the switch.
  3. Damaged wiring or connector. Under the console or dash.
  4. Blown fuse. For the switch or its light.
  5. Module fault. Rare.

Tools You Will Need

You can do most of this testing at home with basic tools:

  • Scan tool that can read transmission codes and data
  • Digital multimeter
  • Wiring diagram for your transmission
  • Correct transmission fluid
  • Drain pan and new pan gasket or filter

Step-By-Step Diagnosis of the P0790 Code

Scan every module for codes first. Many transmission faults store a more specific code that points straight to the cause.

Watch the Switch in Live Data

With the key on, watch the mode switch status in live data as you press the button. It should change cleanly each time.

Inspect the Switch

Remove the console trim and check the switch and its connector. Look for sticky residue from spills and corrosion on the pins.

Test the Switch with a Meter

Unplug the switch and check continuity or resistance across its pins as you press it. Compare the readings with the service manual.

A switch that does not change, or reads unstable values, is faulty.

Check the Wiring

Check for power and ground at the switch, and check the signal wire to the computer for continuity and shorts.

Repairs That Clear the P0790 Code

Match the repair to what your tests found. Then clear the code and drive under the same conditions that set it.

  • Replace a failed mode switch.
  • Clean a sticky or wet switch.
  • Repair damaged wiring.
  • Replace a blown fuse.

After the repair, clear the code and test each mode on a drive. The mode light should change each time you press the button.

Common Mistakes to Avoid

These mistakes waste money or leave the real fault in place:

  • Replacing the transmission module before testing the switch
  • Ignoring spilled liquid in the console

What Repairs Cost

The cost to fix a P0790 code depends on the cause. This table shows typical ranges for parts and labor.

RepairDIY CostTypical Shop Cost
Switch cleaning$0 to $10$50 to $100
Mode switch$20 to $120$100 to $300
Wiring repair$10 to $30$100 to $300

The switch is usually cheap, and the job is mostly removing console trim.

Is It Safe to Drive with a P0790 Code?

Yes. This code usually only disables the shift mode selection. The transmission keeps shifting in its normal mode.

If the transmission seems stuck in a firm or high-rpm mode, drive gently and get it checked.

Related Codes

These codes often show up with this one or point to the same system:

CodeMeaning
P0700Transmission Control System Malfunction
P0705Transmission Range Sensor Circuit Malfunction (PRNDL Input)
P0715Input/Turbine Speed Sensor Circuit Malfunction
P0720Output Speed Sensor Circuit Malfunction
P0730Incorrect Gear Ratio
P0750Shift Solenoid A Malfunction

Fixing the Mode Switch

A P0790 code means the computer found a problem with the normal/performance switch. Failed switches, spills and wiring faults cause most cases.

  • Watch the switch status in live data.
  • Inspect the switch for spills and corrosion.
  • Test it with a meter.
  • Check the wiring.

Frequently Asked Questions

Can I Drive with the P0790 Code?

Yes. The transmission usually works normally in its default mode. You may just lose sport, power or tow mode until the switch is fixed.

What Does Tow or Sport Mode Change?

It changes when and how firmly the transmission shifts. Tow mode holds lower gears longer and can raise line pressure to reduce slipping under load. Sport mode holds gears longer for quicker acceleration. Normal mode shifts earlier for comfort and fuel economy.

Where Is the Normal/Performance Switch?

It is usually on the center console near the shifter, on the shifter itself or on the dash. Some vehicles use a drive mode dial that controls the engine, steering and transmission together.

Can a Spilled Drink Cause This Code?

Yes. Liquid that runs into the console can get into the switch and its connector. Sugar and moisture make the contacts stick or short, so the computer sees a stuck or wrong signal. Cleaning or replacing the switch usually fixes it.

Can Low Transmission Fluid Cause Solenoid Codes?

Yes. Low fluid lowers line pressure, so a solenoid may not get the result the computer expects. That can set performance codes even when the solenoid works. Check the fluid level first.

Should I Use a Universal Transmission Fluid?

It is safer to use the exact fluid your transmission specifies, such as a specific ATF or CVT fluid. The wrong fluid can change how clutches engage and how solenoids and valves behave, which can cause harsh shifts or new codes.

Does the Transmission Need a Relearn After Repairs?

Many modern transmissions adapt to wear, and they may need their learned values reset or a relearn drive after solenoid or valve body work. Some need a scan tool procedure. Check the service manual for your transmission.

What Is Limp Mode?

Limp mode is a protection strategy. When the computer finds a serious transmission fault, it holds one gear, often second or third, and may raise line pressure. You can drive slowly to a repair shop, but acceleration and top speed are limited.

Can a Weak Battery Cause Transmission Codes?

Yes. Low or unstable voltage can make the transmission computer reset or misread its sensors and solenoids. Test the battery and charging system if several unrelated codes appear together.

How Much Does a Transmission Scan Cost?

Many shops charge a diagnostic fee, often around $100 to $200, to read the transmission codes and data and test drive the vehicle. Some parts stores read engine codes for free, but their basic readers often cannot see detailed transmission codes.

Should I Clear the Codes Myself?

You can, but write the codes and freeze frame data down first. Clearing them erases the information a technician needs, and the vehicle may relearn shift settings. If the fault is still there, the codes will return.

Will an Extended Warranty Cover This?

It may, depending on the cause and your coverage. Transmission repairs are often covered by powertrain warranties. Check your paperwork before you pay for a repair, and keep records of fluid services, which a warranty company may ask for.