A phone that will not pair, dropped calls, or silent music can make a Subaru Outback commute frustrating. If your search is for “Subaru Outback Bluetooth not working,” this guide helps you narrow down the cause and choose a safe fix.
Start with simple checks before deleting connections or resetting the infotainment system. The steps below explain how to troubleshoot pairing, calls, and audio, with notes for differences between model years and phone types.
Why Is Subaru Outback Bluetooth Not Working?
Bluetooth problems can come from the phone, the Outback’s multimedia system, or an old pairing record that no longer matches. A setting change or software update can also affect how the devices connect.
First, identify what fails. A phone that does not appear in the car’s device list needs different troubleshooting from one that pairs but cannot play music.
- No pairing: The car and phone cannot find each other or complete the connection.
- Calls fail: The phone connects, but calls use the wrong audio route or the car microphone does not work.
- Music is silent: Calls may work while media audio is disabled or routed elsewhere.
- Connection drops: Bluetooth connects briefly, then disconnects during a drive.
- Only one phone works: The car may connect to a different saved phone first.
Note whether the problem began after a phone update, a battery change, or pairing another device. That timing can point toward a setting or saved connection rather than a failed component.
Check Compatibility and Connection Settings First
Subaru equipment and menus vary by model year, trim, and infotainment system. Check the owner’s manual for your specific Outback rather than assuming that every model uses the same button names or connection process.
Also separate standard Bluetooth from Apple CarPlay or Android Auto. Those phone projection features may use Bluetooth during setup, but they can rely on a USB cable or a wireless connection depending on the vehicle and system.
- Confirm that Bluetooth is switched on in the phone’s settings.
- Check that the phone is not connected to earbuds, a smartwatch, or another vehicle.
- Make sure the Outback is in Park and the ignition is on, following the manual’s pairing instructions.
- Check the phone’s Bluetooth device list and the car’s paired-device list.
- For CarPlay or Android Auto problems, test Bluetooth audio separately to see whether basic pairing works.
Apple’s CarPlay support guidance and Google’s Android Auto Help pages provide device-specific setup steps. Use those instructions alongside the Outback owner’s manual, especially if your phone recently changed operating systems.
How to Fix Subaru Outback Bluetooth Not Working
Work through these steps in order, testing the connection after each one. This approach can fix common pairing and audio faults without erasing unrelated vehicle settings.
1. Restart the Phone and the Infotainment System
Restart the phone first. A restart can clear a temporary Bluetooth process that prevents the phone from finding or staying connected to the car.
Next, park safely and restart the Outback’s multimedia system using the method described in the owner’s manual. Some systems offer a power or volume control that can restart the display; button combinations differ, so do not rely on instructions for another model year.
2. Remove Old Pairings from Both Devices
A saved pairing can become unusable after a phone update or repeated connection failures. Remove the Outback from the phone’s Bluetooth list, then remove the phone from the car’s paired-device list.
- Park the vehicle and open the phone’s Bluetooth settings.
- Select the Subaru entry and choose the option to forget or unpair it.
- Open the Outback’s phone or Bluetooth settings and delete the phone’s saved profile.
- Restart both devices before pairing again.
Menu labels differ by phone and infotainment version. If you cannot find the device-management screen, use the instructions for your specific Outback rather than deleting all system settings.
3. Pair the Phone Again from the Car
Start pairing from the Outback’s multimedia screen or steering-wheel controls, as directed in the manual. Keep the phone unlocked and nearby, then select the Subaru system when it appears in the phone’s Bluetooth list.
Check that the same pairing code appears on both screens before accepting it. Grant the requested permissions for contacts and call history if you want those features, and confirm the connection on both devices.
4. Check Call and Media Audio Permissions
A successful Bluetooth connection does not always enable every feature. On many phones, the Subaru device has separate settings for calls and media audio.
Open the connected-device details on the phone and check that call audio and media audio are enabled. Then select Bluetooth as the audio source in the vehicle and raise the volume on both the phone and the car.
5. Connect Only One Phone for the Test
Multiple saved phones can compete for the Outback’s connection. Turn Bluetooth off on other phones in the cabin, then try connecting the phone with the problem.
If the test works, review the car’s preferred-phone or automatic-connection settings. Remove old devices you no longer use, or set the intended phone as the primary device if the system offers that option.
6. Test with a Second Phone
Try pairing another compatible phone. If the second phone connects and works, the first phone’s settings or software may be the source of the trouble.
If no phone connects, focus on the car’s device list, multimedia system, or vehicle software. A second-phone test does not prove a component has failed, but it helps separate a phone-specific fault from a vehicle-wide one.
Fix Bluetooth Audio, Calls, and Dropped Connections
Different Bluetooth features can fail independently. Test a call and a music track separately so you can report the exact symptom if you need help from a dealer or phone maker.
| Symptom | What to Check | First Action |
|---|---|---|
| Calls work, music is silent | Media audio permission and selected source | Enable media audio and select Bluetooth audio |
| Music works, calls fail | Call audio permission and call routing | Enable call audio and select the car during a test call |
| Sound cuts out | Phone location, other paired devices, and interference | Keep the phone in the cabin and disconnect competing devices |
| One contact cannot be heard | Call volume and phone audio route | Adjust volume during the call and confirm Subaru is selected |
| Connection drops after startup | Automatic connection and saved-device order | Remove unused pairings and reconnect the phone |
When Calls Connect but the Car Has No Sound
During a call, check the phone’s audio-output menu and choose the Subaru system. Some phones keep call audio on the handset or send it to a connected headset, even while the car remains paired.
Raise the call volume while the call is active. The vehicle may store call volume separately from music volume, so adjusting the radio before a call may not change what you hear during one.
When Music Plays Through the Wrong Source
Choose Bluetooth audio on the Outback’s source screen, then start playback on the phone. If the car is set to radio, USB, or another source, the phone can remain connected without playing through the speakers.
Check the phone’s media output selector as well. Streaming apps can remember a speaker, headset, or casting device from a previous session.
When the Connection Keeps Dropping
Move the phone away from other wireless devices and keep it inside the cabin during testing. Bluetooth uses short-range radio signals, and nearby devices or obstructions can sometimes affect a connection.
Check whether the drop happens with one app, one phone, or every phone. If calls stay connected but one music app stops, update that app and test another audio source before changing vehicle settings.
Check Phone and Outback Software
Updates can address connection faults, but the available update process depends on the phone and Outback’s infotainment system. Check for updates through the phone’s normal settings and follow Subaru’s instructions for your vehicle’s system.
Do not install files or apply reset procedures intended for a different model year. If the manual or Subaru support materials do not list an update for your system, ask a Subaru dealer to check the software and service information using your vehicle identification number.
- Install phone operating-system updates from the device’s official settings.
- Update streaming or calling apps if the fault happens only in one app.
- Check the Subaru owner’s manual for infotainment update instructions.
- Ask a dealer whether a multimedia software update applies to your model and year.
Before an update, save important phone data and follow the manufacturer’s instructions. Avoid interrupting an infotainment update or disconnecting the vehicle’s power unless the official procedure directs you to do so.
When to Reset Settings or Get Professional Help
A network reset on the phone can help if several Bluetooth devices have stopped working, but it may erase saved Wi-Fi networks and other connections. Use it only after simpler checks, and read the phone maker’s reset description first.
A factory reset of the Outback’s infotainment system can remove saved devices and personal settings. Check the owner’s manual and consider dealer support before using one, particularly if the system also has navigation or other stored preferences.
Contact a Subaru dealer or qualified repair shop if several phones fail to pair after the basic steps, the infotainment system repeatedly restarts, or Bluetooth controls are missing. Ask the technician to check the multimedia system and relevant software before approving component replacement.
Seek phone-maker support if the phone cannot connect to any Bluetooth accessory. That result points away from an Outback-specific fault and may require checking the phone’s settings or hardware.
How to Avoid Repeat Pairing Problems
Once the connection works, keep the saved-device list manageable and avoid pairing the same phone repeatedly. A simple routine also makes future faults easier to spot.
- Remove phones you no longer use from the vehicle’s paired-device list.
- Keep the phone’s operating system and relevant apps current.
- Pair devices while parked, using the model-specific instructions.
- Test calls and music after pairing, before relying on the connection during a trip.
- Record the model year, phone model, operating-system version, and exact symptom if the issue returns.
Never troubleshoot the screen or phone while driving. Pull over in a safe place before changing settings, and use voice controls only when they let you keep your attention on the road.
Get Your Outback Bluetooth Connection Working Again
Start with phone settings, a restart, and a clean pairing on both devices. Then test calls and media separately, check for software updates, and try a second phone to narrow down the source.
If several phones still fail or the multimedia system behaves unpredictably, ask a Subaru dealer to inspect the system for your specific model year. Avoid a factory reset or hardware replacement until the simpler checks point to that need.
Frequently Asked Questions
Why Does My Subaru Outback Connect for Calls but Not Music?
The phone may allow call audio but block media audio, or the Outback may be set to a different source. Check the Subaru device details in the phone’s Bluetooth settings, enable media audio, and choose Bluetooth audio on the car’s screen. Also check the phone’s media-output selector.
Can I Connect More Than One Phone to a Subaru Outback?
Many Outback systems can store more than one phone, but their connection limits and menus vary by year and infotainment version. The system may connect to a preferred device first. Check the owner’s manual for your vehicle and turn off Bluetooth on other phones while testing one device.
Will Disconnecting the Car Battery Reset Bluetooth?
Disconnecting the battery is not a recommended first fix. It can affect stored settings and may require additional steps, while it may not clear the phone’s saved pairing. Remove the devices from both lists and pair again first. Ask a dealer before disconnecting the battery for an infotainment fault.
Does Apple CarPlay Use the Same Connection as Bluetooth Audio?
CarPlay and standard Bluetooth audio are separate features, although Bluetooth may take part in setting up some wireless CarPlay connections. Depending on the Outback’s year and system, CarPlay may require USB or support a wireless connection. Check Apple’s current CarPlay instructions and the vehicle manual.
Why Does My Subaru Forget My Phone After I Turn It Off?
A phone that disappears from the paired-device list may point to a software or saved-settings problem rather than an ordinary disconnect. Pair the phone again after restarting both devices. If the car repeatedly deletes saved devices or resets other settings too, ask a Subaru dealer to inspect the multimedia system.